P3 Filter Pro2000 PF10

Scott Safety’s Pro 2000 PF10 P3 Particle Filter has exceptionally low breathing resistance to provide comfortable and long duration use.

The Pro2000 half mask filters are compatible with EN148-1 full face masks and half masks. The standard 40mm thread makes it suitable for use on the Proflow and Autoflow PAPR systems, the entire Full Face Mask range, and the Profile40 Half Mask.

The Pro2000 respirator filters offer protection against Solid and liquid particles of toxic agents, radioactive substances and micro-organisms, e.g. bacteria and viruses. Suitable for asbestos handling and removal.

It is important to take good care of your dust mask filter and pay close attention to care advice provided by Scott Safety:

• The filter will not ‘wear out’, but will be clogged with particles and moisture. It is vital to replace your Scott filter when breathing resistance has become increased.
• Single use is recommended when your filter has been used to protect you against radioactive substances or micro-organisms.
• Scott particle filters use only microfibre ‘paper’ media and, therefore, do not use any electrostatic filtering methods.
• Shelf life for Scott particle filters is 10 years. Please inspect the packaging of your filter is intact and in date before use.
• These Scott filters are fully EN approved to the latest standards, marked ‘R’ for re-usable (EN 143:2000/ A1:2006), CE certified, and connect via a 40 mm EN148-1 thread. CE approvals: EN143 CE0121.